dbx DriveRack 220i, Руководство пользователя

Страница: 7 / 57

3
220i
DriveRack
®
User Manual
In addition to the amazing menu of processing available, the 220i also affords you the luxury of utilizing
dbx Zone-Controller series wall-mounted control panels that will allow you to remotely control various
parameters of the 220i. The ZC-1 offers remote programmable Volume control to any installation using
the DriveRack 220i. The ZC-2 provides programmable Volume and Mute control. Both the ZC-1 and
ZC-2 can be programmed to outputs of the DriveRack 220i. The ZC-3 allows Program Selection on
the 220i. The ZC-4 also offers Program Selection via Contact Closure inputs for Room Combining
applications. Up to six Zone Controllers can be used with a single DriveRack 220i, and can either be
wired in series or parallel. The ZC-BOB was created to accommodate “home-run” or parallel wiring to
the unit. With a maximum length of 1,000 ft., the Zone Controllers offer a simple way to create a simple
yet elegant solution to many installation applications.
1
2
3
4
5
6
ZC-BOB
VOLUME
0
1
2
3
4
5
6
7
8
9
10
ZC-1
VOLUME
0
1
2
3
4
5
6
7
8
9
10
MUTE
ZC-2
A
B
C
D
SELECT
A
B
C
D
ZC-3
1
+V
2
3
4
IN
OUT
ZC-4
0.2 - Service Contact Info
If you require technical support, contact dbx Customer Service. Be prepared to accurately describe the
problem. Know the serial number of your unit - this is printed on a sticker attached to the top panel. If
you have not already taken the time to fill out your warranty registration card and send it in, please do so
now.
Before you return a product to the factory for service, we recommend you refer to the manual. Make
sure you have correctly followed installation steps and operation procedures. If you are still unable to
solve a problem, contact our Customer Service Department at (801) 568-7660 for consultation. If you
need to return a product to the factory for service, you MUST contact Customer Service to obtain a
Return Authorization Number.
No returned products will be accepted at the factory without a Return Authorization Number.
Please refer to the Warranty information on the following page, which extends to the first end-user.
After expiration of the warranty, a reasonable charge will be made for parts, labor, and packing if you
choose to use the factory service facility. In all cases, you are responsible for transportation charges to
the factory. dbx will pay return shipping if the unit is still under warranty.
Use the original packing material if it is available. Mark the package with the name of the shipper and
with these words in red: DELICATE INSTRUMENT, FRAGILE! Insure the package properly. Ship
prepaid, not collect. Do not ship parcel post.
Introduction