24
dBm
Advanced Channel Emulator
ACE9600
Operations Manual
2.
Press the IP address data field. Enter the desired IP address and
then press
Enter
, or press
Clear
to revert to the previous value.
3.
Press the Submask address data field. Enter the desired submask
value, then press
Enter
, or press
Clear
to revert to the previous
value.
4.
If applicable, press and enter the Gateway address, then press
Enter
, or press
Clear
to revert to the previous value. Otherwise
leave it at the default.
5.
The MAC address is unique for every instrument, and cannot be
modified.
6.
After editing, press
Return
to store the new values and return to the
main menu.
Figure 2-7. LAN display
To s e t th e in s tru m e n t to lo c a l o r re m o te (LAN) c o n tro l
The
Local/Remote
key toggles the instrument between local and
remote. During remote LAN operation, all keys except
Local
are
disabled. If currently in local mode, go to remote mode by pressing the
Local
key on the front panel. The key text will change to
Remote.
If in remote mode, pressing the
Remote
key brings the instrument back
to the local mode and activates the front panel keys. The key text will
change to
Local.
When a LAN socket is established, the instrument automatically
changes to Remote mode.
To p re s e t th e in s tru m e n t s e ttin g s
Pressing
Preset
causes the instrument to return to the default state
which is defined by the contents of the Preset State register.
