27
SIGMA S218
Cod. 420120258 REV. 1.0
INPUT CONNECTIONS AND AUDIO DAISY CHAIN
CASE A (MONO connection) between subwoofer and speaker:
According to the specific configuration (mono or stereo), one or two cables (not supplied) are required at
input and at daisy chain. XLR connectors are required.
In the event of a MONO connection between subwoofer and speaker:
1. Connect mixer output to subwoofer INPUTS 1 connector
2. Connect subwoofer OUTPUTS 1 connector to speaker input.
3. For each speaker, select the type of input impedance on LINE.
4. For each channel in the configuration, set subwoofer OUTPUTS MODE [4] to XOVER, in order to daisy-chain a
signal filtered to the crossover frequency to the speaker.
