Hollywood DV-Bridge User’s Guide • Using Hollywood DV-Bridge Without a Computer • Page 51
Converting DV to Analog
1.
Use the Mode Selector button on the back of the Hollywood DV-Bridge to change the
mode to
DV to Analog
.
The LED indicators on the front of the unit show the active mode (see the illustration
below).
If you are using a DV camcorder as your input (source) device, put it into Video Tape
Recorder mode. Cue the tape to the spot where you want to star t playing.
If you are using an analog camcorder as your output (target) device, put it into Video
Tape Recorder mode. Cue the tape to the spot where you want to star t recording.
Make sure you do not record over existing footage on the tape that you want to keep.
2.
Press the
Play
button on the DV camcorder or VCR, and press the
Record
button on
the analog camcorder or VCR.
