Daza Pager 2, Руководство пользователя, Страница: 18 / 23

15
9.7 ADD NEW TRANSMITTERS VIA THE PAGER
Select the position
- Open the pager menu.
- Navigate to the ‘ADD ’ option.
- Press the ‘OK’ button to confirm your
selection.
- Select the position where you want to
add the transmitter. The pager will only
show the positions that are available. To
add a transmitter to a position that is
already in use, first remove the existing
transmitter (see paragraph 9.7).
- Press the ‘OK’ button to confirm your
selection.
Type of transmitter
- Select the type of transmitter you want to
add.
- Press the ‘OK’ button to confirm your
selection.
Activate
- Activate the transmitter so it transmits an
alarm when the words ‘ACTIVATE NOW!’
appear on the display. If you do not
activate an alarm within 10 seconds the
pager will automatically exit the menu.
Completion
- Once the transmitter has been
successfully added to the pager the word
‘ADDED!’ will appear on the display and
the pager will emit a ‘success’ tone.
Note! If the transmitter has already been added
to the pager the words ‘
DOUBLE ID Ax’
will
appear on the display. This means that the
transmitter is already listed in the pager at
position x and therefore cannot be added again.
Note! In DazaTools you can install security
settings so this option can only be accessed by
entering a PIN code.