DaytonAudio DCS165-4, Руководство пользователя

Страница: 1 / 7

DCS165-4 Down-Firing Subwoofer Kit Assembly
Thank you for purchasing the DCS165-4 Down-Firing Subwoofer kit. This kit was precision cut
using CNC machinery for the best possible fit and finish. With a little time and patience, your
finished product will provide years of enjoyment. Please use the following instructions for the best
possible results.
Suggested tools and consumables:
Drill Rag or paper towels
5/64" drill bit Solder
Wood clamps (you can never have too many of these) Soldering iron
Sanding block and/or electric finishing sander Wood glue
Speaker or hook-up wire (14-16 gauge) Binding post/terminal cup
Pencil or Sharpie marker Phillips screwdriver
#8 x 3/4" Pan head wood screws Plate Amplifier
Package contents:
First, empty the contents of the package and review parts to ensure everything has been included
and is in good condition. If any parts are missing or damaged please contact our customer service
department at 1-800-338-0531.
Components:
A) 1 x Dayton Audio DCS165-4 6-1/2" Classic Subwoofer 4 Ohm
B)
1 x Port Tube 2" ID Adjustable