DayStar Turbo 601, Руководство пользователя

Страница: 44 / 60

5
TROUBLESHOOTING
You can o pen a program but it doesn't w ork properly, or you
see m e ssa g es reporting system errors.
The Turbo 601 has been tested extensively with existing programs. However, a
few older programs may have compatibility problems.
• Turn off the M odem Memory Manager in the Turbo 601 control panel (also
located in the Memory control panel) and restart your computer. Be sure to
turn the M odem Memory Manager back on when your finished.
• You may need to turn off the card when using the program. Use the
Turbo 601 control panel to turn off the card, then restart the computer.
NOTE: For best perform ance, contact the p rogra m ’ s publish er fo r an upgrade.
A program runs more slowly than it did before installing the card.
• Some programs are designed to run optimally with the 601 processor. These
programs are referred to as being native or “ Accelerated for Power Macintosh.”
Other non-native programs may run faster if you turn off the card when you
use them. Use the Turbo 601 control panel to turn off the Turbo 601.
• If the program is not PowerPC native, contact the program’ s manufacturer
to see if a PowerPC upgrade is available.
• If the program is PowerPC native, make sure that the Turbo 601 was turned
on during the program’ s installation. Some program installers detect which
processor is being used and only install a version for that processor. Also be
sure that the Modern Memory Manager is turned on.
You run out of memory when using programs designed for the
PowerPC microprocessor.
• Turn on virtual memory in the Memory control panel to make more mem­
ory available. For the best performance while using virtual memory, set the
virtual memory size in the Memory control panel to the size o f the avail­
able built-in memory plus 1.
• Install more memory in your computer.
42