DayStar Turbo 601, Руководство пользователя

Страница: 25 / 60

IMSThLLIMG TH6 TURBO 601 - MACINTOSH llw, I K PCR^ORmh 6 0 0
3
NO! I DO NOT hear the “BONG”.
There is no response when the Macintosh is turned on.
or
A different sound (the failure tone) is heard when pow er is turned on.
If you experience any of the above, remove the pow er cord from the back of
the Mac. Then, do the following:
1. Review the instructions and verify proper installation, making sure that
the Turbo 601 is firmly seated in the cache slot.
2. If the failure tone was heard, make sure all of the SIMMs are properly
installed.
3. Plug the pow er cord into the back o f the Macintosh and restart as
before.
If the startup process continues to fail, the board may have been damaged
during installation or shipment. Contact your com puter dealer or call DayStar
Technical Support (9 am to 6 pm EST) at 404-967-2077 for further assistance.
You can also contact DayStar online through CompuServe: 73300,1544,
AppleLink: DAYSTAR.TECH, America Online: DAYSTAR OL, GEnie: DAYSTAR or
eWorld: DAYSTAR OL.
2 3