DAYSTAR FILTERS
CALCIUM QUARK
Congratulations on your purchase of a Quark Calcium “Eyepiece” solar filter,
designed specifically for compatibility with F/7 or greater Refractor
telescopes. Please read this manual before using the product.
To use the filter, plug in the included power supply. Then insert the
Quark and insert an eyepiece or camera in the rear of the Quark. Turn
the knob to point straight away from the light. When the light turns
green in about 5-15 minutes your viewing experience can begin.
To prevent damage, we strongly recommend using a UV/IR cut filter over
80mm of aperture.
Warnings:
Do not disassemble the filter, the blocking element is separated from the
etalon and the complete assembly must be used together for safe viewing.
Do not power the filter from a computer or cell phone charger as the Quark
requires a high current power supply (> 1.5A) for operation.
For assistance:
Call:
1 (866) 680-6563 Email: [email protected]
Visit:
http://www.daystarfilters.com
