10. Snap the appropriate bezel onto the front of Genesis MP.
11. Locate four of the screws that came with your SCSI device.
12. Grasping the back of the new SCSI device from inside Genesis MP, slide it toward
the front bezel until it fits snugly against it.
Positioning the 5.25" Device
13. Install the screws through the chassis into the side of the 5.25" device (or into the
adapter bracket if you are installing a 3.5" device).
Screws Installed in
5.25" Device
Note: Some devices may only have two holes and therefore only require that you
install two Phillips head screws.
Chapter 3 – Connecting Additional Peripherals
Genesis MP
52
◆
Phillips head screws
