DisplayIt micro
Introduction
Thank you for purchasing the DisplayIt Micro. This product will allow you to duplicate your computers
video image on up to 128 displays up to 125 meters away from you computer.
There are two types of DisplayIt Receivers available, single screen version and dual screen version.
Features
¾
Allows you to display a PC’s screen up to 110 meters away from a PC, using a single CAT 5,
6 or 7 cable.
¾
Up to 1600 x 1200 @ 75Hz (depending on distance).
¾
Advanced CAT5 technology.
¾
Plug-and-play installation.
¾
No additional software is required for operation.
¾
Optional Micro Splitters powers receiver units.
¾
With optional DisplayIt Micro Splitters, allows up to 128 displays
Operation
The DisplayIt Micro is simple to install, no software is required. Just connect the units up as described
in quick setup system guide and you're ready to work.
Installation
Before connecting your computer to the DisplayIt Micro Transmitter unit, please ensure that your
computer is powered off.
Cable Requirements
The DisplayIt Micro Transmitter unit will connect to your PCs system monitor port.
The UTP / STP interconnect cable to connect the DisplayIt Micro’s Transmitter and Receiver unit is
not supplied with the DisplayIt Micro. If you do not have suitable CAT 5, 6 or 7 UTP or STP cable
available, please consult your dealer.
The Transmitter and Receiver units are connected by industry standard structured cabling (Category
5, 6 or 7 UTP/STP, 4-pair) terminated with RJ45 connectors.
The cable used should be solid trunk cable. Stranded patch cable will give poor results over longer
distances. The connector wiring must meet the EIA/TIA 568 standard.
CAT5 Wiring Scheme
The Transmitter Receiver interconnection cable is terminated in RJ45 connectors and should be wired
according to the EIA/TIA 568 (Scheme B preferred) industry standard. The DisplayIt may function with
other wiring schemes, but the video quality may be impaired.
Note:
The DisplayIt Micro Receiver requires power, if it is not connected to a Micro
Splitter. Use only the power supply unit supplied with the DisplayIt Micro units.
Note:
Failure to wire the twisted pairs correctly will impair the video quality dramatically
and / or prevent correct operation.
Содержание DISPLAYIT MICRO
Страница 1: ...DisplayIt micro Digital Signage Installation guide...
Страница 5: ...Quick Setup Guide...
