Solid plates,
drain holes
toward
mounting pole
Troubleshooting
1. Unscrew the thumbscrew securing the tipping spoon
assembly to the ISS base. Slide the assembly down and
away from the base.
2. Use a damp, soft cloth to gently remove any debris from
the tipping spoon assembly, being careful not to damage
any moving parts or scratch the spoon.
3. When all parts are clean, rinse with clear water, and
replace the assembly. (See “Install the Rain Collector
Tipping Spoon Assembly” on page 4.)
4. Replace Air Quality PX4 2.4.6 Measurement Unit
26
