Power
Meteostation
telemetry
Data outputs
/ connect meteosta-
tion data output here
Data outputs
/ connect meteosta-
tion data input here
Wind speed sensor
1. Remove the typing spoon assembly
2. Connect APM sensor unit to data input cable inside
typing spoon assembly
3. Connect APM sensor unit to data output cable inside
Pro+ body
4. Connect power source cable to APM sensor unit
5. Attach wind sensor to plastic tubes and
attach sensor to APM
6. Attach whole APM sensor and unit to
typing spoon assembly and use screws
to tighten spoon assembly to ISS body.
Install the wind speed and direction sensor
10
