DAVIS TMS-5500-SL, Руководство пользователя

Страница: 15 / 48

Traction Control Setup
The following parameters are adjustable; however
they are factory set to the most common settings, and
should not need to be adjusted by most users.
Trigger Count:
The unit is factory set for 4 triggers per revolution, for
8 cylinder operation. The unit can be configured to
use between 1 – 9 triggers per revolution.
Starting RPM
is a user adjustable setting that
allows the racer to set the point at which the unit
begins making corrections. If the Starting RPM is set
to 5000 RPM, then the unit is active and monitoring
the engine, but not making any corrections until the
Starting RPM is reached. Once the Starting RPM is
reached, the unit will make corrections as needed
above 2000 RPM.
Rev Limiter
is a user adjustable setting that
allows the racer to set a value for a max RPM Rev
Limiter. Range is 6000 to 9900 RPM.
Start Retard
is a user adjustable setting that
allows the racer to set a timing retard while cranking
the engine. This may allow for easier starting, but
may not be compatible with all magnetos. The retard
can be adjusted from 10-18 degrees in 2 degree
increments, or turned off.
13
Davis Technologies TMS-5500-SL Elec Points
www.moretraction.com