8
Davis Technologies TMS-9500-SL Short
www.moretraction.com
Testing
After installation it is recommended that you test the
system. To do so please follow these instructions
step by step.
Forced Activation Test:
This test is useful to check both stages of retard.
1. Turn “ON” the power, the LED will
flash to
indicate that power is on. Next the LED will blink
to show the current Mode setting.
(Example
-
ON-ON
-off-off-
ON-ON
-off-off-
ON-
ON
-off-off-
ON-ON
-off-off,
to show Mode 4).
2. Connect a timing light to the engine.
3. Start the engine.
4. With the engine idled up to about 3500 rpm; press
the Test button on the unit until the LED glows solid.
The first timing retard stage will activate for 4
seconds, then the second stage for the next 4
seconds.
Содержание TMS-9500-SL Short
