background image

31 

Davis Technologies TMS-9500-SL Short 

www.moretraction.com 

DISCLAIMER

 

DAVIS TECHNOLOGIES PRODUCTS ARE 

FOR CLOSED COURSE USE ONLY. 

The  following  terms  and  conditions  apply  to  all  products 

manufactured  and  sold  (“Products”)  by  Davis  Technologies, 

LLC (“Davis”).

 

ASSUMPTION OF RISK 

 The Products are designed and 

manufactured  for  use  on  closed  courses  only.  The  purchaser 
and/or  user  of  the  Products  assumes  the  risk  that  proper 
precautions are at all times in place for the use of the Products 
and for the safety of the user of the Products and other persons 
(such as, without limitation, spectators and course workers). 

2. 

FULL AND FINAL RELEASE AND WAIVER OF LIABILITY 

AND  ALL  CLAIMS  -  Vehicle  racing  is  an  inherently  dangerous 
sport  with  significant  risk  of  personal  injury  and  death.  The 
Purchaser and/or end user of the Products WAIVE AND FULLY 
RELEASE any owner, officer, employee or agent of Davis from 
any and all liability for any loss, damage, injury or expense that 
the Purchaser and/or end user may suffer as a result of the use 
of  the  Product  due  to  any  cause  whatsoever,  including 
negligence, gross negligence, breach of contract, or breach of 
any statutory or other duty of care. 

3. 

AGREEMENT  TO  INDEMNIFY,  TO  SAVE  AND  HOLD 

HARMLESS 

 The Purchaser and/or end user agree to indemnify 

and to save and hold harmless any owner, officer, employee or 
agent of Davis from any litigation expense, legal fees, liability, 
damage,  award  or  cost,  of  any  form  or  type  whatsoever,  they 
may  incur  due  to  any  claim  made  against  them  or  any  one  of 
them  by  Purchaser  and/or  end  user,  or  Purchaser  and/or  end 

user’s estate, whether the claim is based on the negligence or 

the gross negligence of Purchaser and/or end user, or otherwise 
as stated above. 

4. 

PROPER  USE  OF  PRODUCTS 

  Purchaser  and/or  end 

user are solely responsible that the intended and actual use of 
any Product is made in compliance with any manuals provided 

Содержание TMS-9500-SL Short





































Отзывы: