background image

Projector ceiling mount  application   fig 1

Fig 1

Projector wall mounting application   fig 2

Fig 2

 

Model 

                                                                                                                                         

 

UPM50 PROJECTOR MOUNT  CEILING/WALL

  

To ensure the correct usage, please read and follow the instructions  manual thoroughly. Please store the instructions in a safe place for future reference.  

 

 
 
 
 
 
 
 
 

 

To ensure customer safety, be sure to decide the installation location so that the strength is sufficient to withstand the weight   of both the projector

 and the mount. 

Fully tighten all of the mounting screws as specified in the instructions.

1

Special techniques are necessary for installation of the panel display mount.

 

Do not attempt to perform this work by yourself. 
Request an installation specialist to install this unit. 
Manufacturer assumes absolutely no responsibility for injuries and damages that may occur due to improper installation and handling.

  

Please remember that if you remove the mount from  the wall/ceiling  later, you will find the screw holes and anchor bolts for the

mounting unit left on the wall. 

All  PDR mounts and adapters carry a limited lifetime warranty from ship date against defects in material and workmanship. 
We are not liable for improper installation that results in damage to mounts, adapters or presentation equipment.

Mounts by

 

 

 A division of David Engineering & Mfg. Inc.

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 

 

 

  

Parts Configuration Chart    

                                               

 

5/16" x 2  1/2” Lag bolts …4 pcs

D

(Note: used with the 5/16" Flat washers C).

 

C

5/16" Flat washers…4 pcs 

  

                                               

 

!

Simple to adjust no tools required

!

Applications for wall or ceiling mounting

!

Adjustable height from 2 1/2” to 12” 
(adapter req. For additional height)

!

Pitch + yaw adjustments  and 360 deg. 
rotation

!

Quick projector removal with exclusive

    

Bayonet locking system”

 

 

           Features 

Thank you for purchasing the

 PDR 

Projector mount with the exclusive

 “Bayonet locking system” 

(patent applied for)

Universal adapter plate assembly 1pc
SEE SHEET 3 FOR  INSTRUCTIONS

Projector mount  1 pc

Safety lever

Locking thumb screw

Slide adjustment

Rotate 360 deg

Содержание PDR UPM50






Отзывы: