David Engineering & Mfg PDR PSTM4060, Руководство пользователя

Страница: 1 / 7

Model PSTM4060
Features
1
Mounts by
A division of David Engineering & Mfg. Inc.
Thank you for purchasing this PDR mount product
To ensure the correct usage, please read and follow the instructions manual thoroughly. Please store the instructions in a safe
place for future reference.
All PDR mounts and adapters carry a limited lifetime warranty against defects in material and workmanship.
Check the PDR website for details @
www.PDRmounts.com . We are not liable for improper installation that results in damage
to mounts, adapters or presentation equipment.
Special techniques may be necessary for installation of the panel display mount.
?
Do not attempt to perform this work by yourself. Always have a helper
?
If you are not capable of the installation, request an installation specialist to install this unit.
? Manufacturer assumes absolutely no responsibility for injuries and damages that may occur due to improper installation and handling.
?
Please remember that if you remove the panel display from the wall later, you will find the screw holes and anchor bolts for the mounting
unit left on the wall. Also note that long use of the panel display may discolor the wall around it due to its heat and airflow.
To ensure customer safety, be sure to decide the installation location so that the strength is sufficient to withstand the weight of both the display and the mount.
Always use at least two persons for all installations. Fully tighten all of the mounting screws as specified in the installation instructions.
?
Simple 3 piece design
?
Low profile 5/16” ( 8 mm)
?
Fits displays with mounting holes not exceeding 857mm left to right and 435mm top to bottom
?
Recommended for 40” to 60”
?
Auto-loc mounting feature (patent pending)
?
150lb load rated
?
Wall mount to 16” or 24” wood stud location
?
Lifetime warranty
?
Made in the USA