David Clark DC PRO-X2 Series Скачать руководство пользователя

Страница: 1 / 12

C O M P L I A N C E

FCC Compliance Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

- This device may not cause harmful interference, and

- This device must accept any interference received, including interference that may cause undesired operation.
Changes and modifications not expressly approved by David Clark Company, Inc. can void your authority to operate this

equipment under Federal Communications Commission rules.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the

FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will

not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which

can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or

more of the following measures:
- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following

two conditions:
1. This device may not cause harmful interference, and

2. This device must accept any interference received, including interference that may cause undesired operation of the device.

Important Safety Information

• Make sure portable devices do not interfere with the aircraft's navigation and communication systems. Reference

FAA AC 91.21-1D or later revision for installation approval.

• It is the pilot's responsibility to ensure that portable devices do not interfere with the aircraft's navigation and

communication systems, as well as to determine if the portable device is suitable for use with the headset.

• Do NOT attempt to repair this headset. Contact David Clark Company for specific care, return and shipping instructions

(see page 12 for contact information).

FAA Technical Standard Order

The David Clark Company, DC PRO-X2 family of headsets, PN 43105G-( ) are approved to TSO and ETSO C139a and are

marked to indicate this approval. This family of headsets has been designed to perform and withstand exposure to the

environmental conditions summarized on page 13.

This article meets the minimum performance and quality control standards required by the technical standard order (TSO).

Installation of this article requires separate approval. Reference FAA AC 91.21-1D, or later version, for installation guidance.
This article may contain the non-TSO function of Bluetooth

Bluetooth

does not interfere with this article's TSO-C139a

compliance.
The conditions and tests required for TSO approval of this article are minimum performance standards. Those installing this

article either on or within a specific type or class of aircraft must determine that the aircraft installation conditions are within

the TSO standards which include any accepted integrated non-TSO functions. TSO articles and any accepted integrated

non-TSO function(s) must have separate approval for installation in an aircraft. The article may be installed only according to

14 CFR part 43 or the applicable airworthiness requirements (see table on page 13).

French version of RSS-Gen, Sec. 7.1.3

Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence.

L’exploitation est autorisée aux deux conditions suivantes: (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur

de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre

le fonctionnement.