SUBMERSIBLE DRAINAGE PUMPS
Model Numbers:
D10A, D15A, D25A,
D40A & D40M
P R O D U C T
D E S C R I P T I O N
Portable electric submersible
drainage pumps up to 400W
nominal output.
A P P L I C A T I O N S
• Dewatering of cellars, garages,
ditches, pits & ponds
• Pumping clean or slightly dirty
water
• Sump emptying
• Decorative water features
“A” suffix models equipped with
preset length float switch for
automatic operation
O P E R A T I N G L I M I T S
F E A T U R E S & B E N E F I T S
Open impeller, centrifugal design
• Able to pump small soft solids
in suspension
• Less susceptible to blockage
Double mechanical shaft seal in
oil bath with hard faced silicon
carbide / ceramic seal on pump
side (D10 & D15 models have
single seals)
• Added motor protection
• Long service life
Sand slinger lip seal
• Added protection
• Long service life
Corrosive resistant 304 stainless
steel motor shell and strainer
• Long service life
• Attractive, lasting appearance
High quality paint finish
• Long service life
• Attractive lasting appearance
Automatic resetting thermal
overload
• Protected against overloading
HO7RNF oil resistant leads, 10
metres long with 3 pin power
plug
• Easy to connect to power
supply
• Longer life in dirty water
Capacities to
240lpm
Max. total head
12m
Max. submergence
10m
Max. operating
temperature
50
o
C
Suitable Fluids :
Sewage or “grey water” of neutral
pH containing up to 10% of small
soft organic solids (<10mm OD).
Some accelerated wear should be
expected while pumping hard solids
in suspension.
H/O & MFG SCORESBY
SUMP PUMPS
