Features:
The multi-purpose tool offers an excellent all-round solution, ideal for working on small PCBs,
components, soldering etc.
The magnifying lamp with integrated 3rd hand is intended for illuminating work areas and it
is equipped with a magnifying glass.
The tool also comes with soldering iron stand, alligator clips, soldering wire spool holder,
sponge, rosin, as well as cleaning ball to help with soldering.
It can be powered either by 4 AA batteries(not included) or external power
adaptor(required).
Specifications:
Magnifying glass lens size: 90mm
Magnification: 3X or (2.5X+4X)
LED illumination: 16 pieces LEDs
Neck (for magnifying glass) length: 265mm
Neck (for alligator clips) length: 250mm
Sponge size: 30x50mm
Rosin :10g
Base size: 190x170mm
Operation Instructions:
Take the lamp out of the packaging and place it on a level, even surface.
Adjust the lamp holder and the light-arm as desired.
Insert 4 AA Batteries or use the power adaptor to get the unit powered up.
The tool can also be powered by 4*AA batteries is there's no socket nearby.
Switch on the LED magnifying lamp, then start your operation.
LED Magnifying Lamp with
Third Hand
RND is a trademark of Dätwyler Schweiz AG, Gotthardstrasse 31, 6460 Altdorf, Switzerland, [email protected]