Datum Systems VoidMate, Руководство по установке

Страница: 1 / 2

Base Plate
Foot
End Clamp
Sensor
Plug
On / Off Switch
Solar Panel
Sensor
Clamp
Shoulder
Gaiter
1. VoidMate Glossary.
24/7 Helpline: 0845 600 2511 datum.helpdesk@datummonitoring.com
2. Create a small void in the ballast between sleepers and slide
the VoidMate under the rail.
4. Slide clamp over the foot of the rail.
6. Fit sensor loosely to side of VoidMate.
3. Ensure the VoidMate base is flush under the rail.
The bracket should sit on the foot of the rail as shown.
5. Tighten the bolts on the clamp repetitively and alternatively
using the M10 Allen key until secure.
Systems
Void Mate
T R A C K V O I D M O N I T O R