Datron TW7201I, Руководство пользователя

Страница: 46 / 106

3: Operation
3-22 TW7201I-MS
3. Continue adding channels as necessary.
4. Press
E
to exit this mode.
You can delete and enter a different single-digit channel at the same time by
writing over the contents of an existing channel.
1. Scroll to the channel.
2. Press the single-digit number of the channel to add.
3. Press
E
.
3.6.3
Starting and
Stopping
Scanning
1. Press
SCAN
to start scanning within the selected scan group. Scanning
begins with the first channel in the scan group and continues in numerical
order as each channel number is displayed.
2. Press
SCAN
again to stop the scanning process.
3.7 Placing an ALE Call
The ALE option automatically selects frequencies that support
communication traffic between stations in a network. This section does not
cover the ALE option in detail. For detailed instruction on ALE operations,
refer to the 7000ALE Radio Control Program Operator Manual
(7000ALE-MSOP).
To initiate an ALE call:
1. Press
OPTION
until the
ALE
icon flashes.
2. Press
STATUS
to turn the option
ON
.
3. Press
CALL
.
4. Scroll to find the desired calling option:
THIS IS
: Creates a link, exchanges messages, and remains linked.
THIS WAS
: Creates a link, exchanges messages, then terminates the link.
RE-LINK
: Automatically chooses the best possible channel using the
information from a prior
THIS IS
call.
POLLING
: Automatically completes a
THIS WAS
call on each of the scan
group channels. Link quality information is recorded for each channel.
5. Press
CALL
to make the selection.
6. Scroll to the type of call to make:
INDIVIDUAL
or
NET
.
7. Press
CALL
to make the selection.
Display:
To:xx nnnn
(where xx is the destination address
number and nnnn is the address name)
8. Scroll to the destination address.