Datron neo, Инструкции по установке

Страница: 10 / 25

2 Connecting the supply media
Network integration
2-2 DATRON AG Setup instructions neo
1.21
CAUTION
Power circuit interruption
If consumers other than the DATRON machine are connected to
the same power circuit, there is risk of circuit interruption.
■
Always connect the DATRON machine to a separate power
circuit protected by an RCD (3x16
A).
■
Do not connect any other consumers to the circuit used by the
DATRON machine.
Fig. 2-1: Voltage supply connection 3 x 400 V
Data
Voltage
3 x 400 V /16 A
Frequency
50 Hz / 60 Hz
Power consumption with
3.5 kW
2.2 Internet connection
An Internet connection for the control computer integrated in
the machine is absolutely necessary to be able to make use of
remote maintenance. This is the only way DATRON can access the
machine control if support is needed, making immediate analysis
and help possible.
2.3 Network integration
Integration of the DATRON machine into the customer's network
happens at the risk and responsibility of the customer.
If you have any questions about the network integration, consult
an IT specialist who can consider the situation at your site.