Datex-Ohmeda S/5 Compact Anesthesia Monitor, Техническое справочное руководство

Страница: 14 / 72

Datex-Ohmeda S/5 Compact Anesthesia and Critical Care Monitor
1.3 Symbols
1.3.1 Symbols on transport packaging
The contents of the transport package are fragile and must be handled with care.
Indicates the correct upright position of the transport package.
The transport package must be kept in a dry environment.
Indicates the temperature limitations within which the transport package should be
stored.
1.3.2 Symbols on equipment
Dangerous voltage.
When using the ARK Barcode Reader, N-SCAN, do not stare into beam. The N-SCAN
Barcode Reader is a Class 2 laser product.
Attention, consult accompanying documents.
When displayed next to an O
2
value, indicates that the FiO
2
low alarm limit is set
below 21 %.
When displayed next to an HR value, indicates that the pacer is set on R or a wide
QRS is selected.
On the Interface Module, M-INT, indicates that the connection is for external devices
and not for patient cables.
On the Tonometry Module, M-TONO, indicates that use only Tonometrics catheters.
On the BIS Module, M-BIS indicates that the converter must not be opened for any
reason or autoclaved.
On the rear panel of the Compact Monitor Frame Unit, indicates the following
warnings and cautions:
− Electric shock hazard. Do not open the cover or the back. Refer servicing to
qualified personnel.
− For continued protection against fire hazard, replace the fuse only with one of the
same type and rating.
− Disconnect the power supply before servicing.
Type BF (IEC-60601-1) protection against electric shock.
Type BF (IEC-60601-1) defibrillator-proof protection against electric shock.
Document No. M1031508
4