Datex-Ohmeda AS/3 Compact Monitor, Техническое справочное руководство

Страница: 58 / 92

Datex-Ohmeda AS/3 Compact Monitor, CS/3 Compact Monitor
50
Document No. 896 623
4.5 Interfacing Dräger Cicero and Cato
It is possible to interface Dräger Cicero and Cato to the Compact Monitor via the Interface Module,
M-INT.
For further information, please contact your authorized Datex-Ohmeda distributor.
WARNING Always make sure that the combination complies with the international safety
standard IEC 60601-1-1 for medical electrical systems and with the
requirements of local authorities.
4.6 Interfacing a printer
It is possible to interface a laser printer (either serial or parallel) to the Compact Monitor via the UPI
Board. Only serial printer can also be interfaced via the UPINET board. The printer must be PCL5
compatible.
WARNING Always make sure that the combination complies with the international safety
standard IEC 60601-1-1 for medical electrical systems and with the
requirements of local authorities.
WARNING Connecting the power supply cord of the printer to the wall socket may cause
the printer leakage current to exceed the limit specified for medical equipment.
Always connect the printer to an appropriate separating transformer.
4.7 Interfacing a computer
It is possible to interface a computer to Compact Monitor. For further information, please contact
your authorized Datex-Ohmeda distributor.
WARNING Always make sure that the combination complies with the international safety
standard IEC 60601-1-1 for medical electrical systems and with the
requirements of local authorities.
WARNING Connecting the power supply cord of the computer to the wall socket may cause
the computer leakage current to exceed the limit specified for medical
equipment. Always connect the computer to an appropriate separating
transformer.