Datex-Ohmeda ARK N-SCAN Скачать руководство пользователя страница 19

Страница: 19 / 30

S/5 Anesthesia Record Keeping Keyboard and Barcode Reader

Document No. 8001019-3

5.1

Keyboard menu

A service menu for testing the command board functions and for setting the K-ARKB type.
NOTE: All counters are automatically zeroed on returning to the previous menu.

Upper Led

is for testing the upper alarm LED (red) on the

command board. When the text is highlighted, the upper
alarm LED can be turned on and off by pressing the
ComWheel.

Lower Led

is for testing the lower alarm LED (yellow) on

the command board. When the text is highlighted, the
lower alarm LED can be turned on and off by pressing the
ComWheel.

Dummy Press

is for testing the ComWheel. When the text

is highlighted, pressing of the ComWheel create a sound
from the loudspeaker and the corresponding number on
the service data field increase.

Service Data
Message count

counts the number of messages that are

sent out to the main CPU board.

Leds upper

and

lower

indicate the states of the alarm

LEDs on the command board.

Direct action keys

texts are indications to the command

board membrane keys. When a key on the command
board is pressed, the corresponding text in the menu
changes its colour.

Control wheel, Press

counts the ComWheel pressings.

Control wheel, Clockwise

and

Counterclockwise

the

ComWheel turnings.

Since

shows the date and the time of the last run time

reset.

Содержание ARK N-SCAN































Результаты поиска

Содержание ARK N-SCAN

Отзывы:

Бренды по названию

Популярные бренды

Datex-Ohmeda ARK N-SCAN, Техническое описание слота

Результаты поиска

Содержание ARK N-SCAN

Отзывы:

Бренды по названию

Популярные бренды