12.2.1. Configuring Remap
In order to program which buttons should be pressed to activate each control, please follow
these steps:
Step 1:
Scroll up, down, left or right to highlight the button which you would like to remap.
Step 2:
Select the highlighted button using the A button.
Step 3:
Scroll up or down until you are shown the button which you would like to assign to the control.
Step 4:
Press the A button to confirm.
Step 5:
Repeat the same steps to remap any other buttons. Once you are happy with your
configuration press the Start button to save the configuration. As detailed under section ‘11’
you can now activate the feature with your chosen configuration.
12.3. Rapid Fire
The unique programmable Rapid Fire feature can boost your firepower in any Xbox 360 game.
The Rapid Fire can be set to operate at different speeds and can be assigned to wide range of
buttons.
After entering the WildFire EVO Menu as detailed under section ‘10’, using the A button select
the Rapid Fire image to enter the Rapid Fire configuration screen. If you would to return to the
WildFire EVO Menu at any time press the Back button. As shown the Rapid Fire configuration
screen displays the buttons which are assigned Rapid Fire and a Rapid Fire speed slider bar
which enables you to adjust the rate of fire.
12.3.1. Choosing Which Buttons are Assigned Rapid Fire
In order for you to get the most out of the Rapid Fire feature you can choose exactly which
button or buttons it is assigned to. To program which buttons will use Rapid Fire press any of
the buttons shown in the following illustration.
RAPID FIRE
A
B
x
Y
LB
RB
LS
RS RT
LT
Buttons Assigned
Rapid Fire
Rapid Fire Speed
Slider Bar
START
BACK
RB Button
Y Button
B Button
X Button
A Button
Right Analogue
Stick Click
LB Button
Left Analogue
Stick Click
LT Button
RT Button
Start Button
Back Button
RAPID FIRE
A B
x Y
LB
RB
LS
RS RT
LT
START
BACK