Datawell BV Waverider DWR-G, Руководство по установке

Страница: 8 / 13

8
7 Software
Datawell has designed its own software as part of a complete wave measuring system, called
Waves4
7.1 Waves4
Waves4 is configured to your specific setting using the Waves4 configurator. The Waves4
configurator acquires the data which is sent from the buoy. The configurator corresponds to the
Waves4 software which is the presentation part of the software.
Below description explains the installation and configuration of the Waves4 suite for two
deployment scenarios:
7.1.1 A setup with one buoy and an HF-receiver
7.1.2 A site with several buoys using multiple HF receivers and satellite options.
7.1.1 Basic
This section describes the setup for the basic system as shown in the figure below
Example of a basic network
The network consists of:
Buoy The deployed DWR4 buoy using the HF-link.
Receiver An RX-C receiver using the Ethernet connection.
Computer The computer receives, processes, and displays the data of the Buoy. On this
computer the following parts of the Waves4 suite are installed:
•
buoyd
•
waved
•
Waves4 configurator
•
Waves4
In this setup the user has only one buoy, but this can be scaled with multiple buoys.