Datavideo TVS-3000, Инструкция по эксплуатации

Страница: 23 / 64

23
The “NET” category’s operation procedure for applying a specific material to the switching
channel is the same as the “CAMERA” category. After adding the pull-stream signal into this
list, users need to click the switching channel which is assigned to “NET” and then double-click
a specific material in the “NET” category to active the material for using in the switching
channel.
4.2.2 Switching Channels
After assigning the materials to the list of each category, users can assign 8 channels to be the
switching channels for a specifc category/signal for switching to the PROGRAM channel at any
time or for quoting to other switching channels for signal combination.
After creating a new engineering file, the TVS-3000 system will assign default corresponding
lists and categories for the 8 switching channels. If users need to change the corresponding
lists and categories, users can click the tag from the top of the switching channels to select
corresponding material list from the drop-down menu.
For the lists in the CAMERA/REPLAY/BUFFER/GRAB/NET categories, after a specific switching
channel is assigned to a corresponding category, users need to double-click a specific material
in that category to confirm that the material in the specific category is used by the switching
channel.
For the lists in the IMAGE/SOUND/DDR/GFX/SUBTITLE categories, after the switching channel
is assigned to a corresponding category, this switching channel will be paired to the list of this
specific category. Once one of the material in the list is clicked for playing or all of the
materials in the whole list are clicked for playing in sequence, they will be shown in the paired
switching channels.
If users want to assign the camera signal to a specific switching channel, users need to confirm
that this switching channel is assigned as “CAMERA”. After that, users need to click the
preview window of this switching channel (The selected preview window will be surrounded
by a white rectangular). After that, please double-click your desired camera signal in the
“CAMERA” category for assigning this signal to the switching channel which is surrounded by
the white rectangular. After the signal is successfully assigned, the numbering of this camera
signal in the “CAMERA” category will be shown after the text “CAMERA” on the tag of the
switching channel for users to confirm which the camera signal is.
After pressing the drop-
down menu, users can
assign a specific option
from the list for this
switching channel.