Datavideo PTC-285NDI, Инструкция по эксплуатации, Страница: 66 / 144

66
menu of the above-mentioned switchers to adjust them in the same video
standard before connecting to prevent the video format incompatible issue
and the issue that the video that is shot by the PTC-285NDI can not be
displayed normally in the MULTIVIEW window of the above-mentioned
switchers.
9.3 AT(Auto-Tracking)
The “AT” option allows you to set detailed settings for PTC-285NDI’s two
tracking modes including “Presenter” and “Zone” modes. For the “Presenter”
mode, the “Tracking Start Position” drop-down menu allows you to set the
start position of the auto-tracking. The “Figure Size” option allows you to
select “Full”, “Half Body” or “Close Up”. For the “Zone” mode, the “Zone
Setting” allows you to set 2 to 4 auto-tracking areas. The “Tracking Start Area”
allows you to set the start area of the zone tracking. The “Zone” option allows
you to set the tracking area within 2 areas to 4 areas. For details of the auto-
tracking function, please refer to Chapter 8 How to Use PTC-285NDI’s AI Auto
Tracking.