Datavideo PTC-140NDIW, Инструкция по эксплуатации

Страница: 13 / 92

13
3. Basic Setup
3.1 Power-On Initialization
As shown in the diagram below, after you plug in the power cord, the tally light in
the front will start flashing red and will be OFF as soon as the power-on
initialization is complete. The camera head should be at the HOME position with
the lens facing front. However, if preset 0 is set, it will return to the 0
th
preset
position.
3.2 Video Output
You are allowed to view the camera video via NDI® | HX/DVIP port, HDMI OUT
and 3G-SDI OUT.
NDI® | HX/DVIP Port
Follow the instructions below to view your video on the web user interface.

Connect the PTC-140NDI camera directly to your PC/Notebook PC
1. Connect the PTC-140NDI to the PC/Notebook using an Ethernet cable.
2. On your PC/Notebook, open the web browser and enter camera’s default IP
address into the address bar.
Connect the DC 12 V
power adapter