Datavideo NVS-35, Инструкция по эксплуатации

Страница: 50 / 64

50
Stop recording

While recording, the RECORD button is solid red.

Press and hold the RECORD button for approximately 2 seconds.

When the record function is terminating, the RECORD button turns from
solid red, then blinking red and finally to solid white.

When the RECORD button is solid white, this indicates that the record
function has been successfully terminated.
Stream Button
Press the STREAM button to start/stop streaming.
The table below summarizes the STREAM Button LED behaviors:
STREAM Button
Solid White Stream function in idle state
Blinking Red Stream function is activating or resetting
Solid Red Stream function activated
Start streaming

When idle, the STREAM button is solid white.

Press and hold the STREAM button for approximately 2 seconds.

When the stream function is activating, the STREAM button turns from solid
white, then blinking red and finally to solid red.

When the STREAM button is solid red, this indicates that the record
function has been successfully activated.
Stop streaming

While streaming, the STREAM button is solid red.

Press and hold the STREAM button for approximately 2 seconds.

When the stream function is terminating, the STREAM button turns from
solid red, then blinking red and finally to solid white.

When the STREAM button is solid white, this indicates that the stream
function has been successfully terminated.