Datavideo NVS-35, Инструкция по эксплуатации

Страница: 47 / 64

47
Now, follow the steps below to set up the SRT traffic:
1. Select SRT from Stream Type drop-down menu.
2. Scroll down to the bottom and locate a second Stream Type drop-down menu in
which you will be able to set the device to the Caller (source) or Listener
(destination) mode.
a. If Caller is selected, do the following:

In the IP Address and SRT Port fields, enter the IP address and the port
number of the destination device (decoder) respectively. If your SRT
stream destination is a CDN or media server, the IP address and the port
number should be provided by the service provider.

In the Latency field, enter the amount of latency to apply to the stream.
The default value is 1000 ms.
b. If Listener is selected, simply enter a port number that you intend to use on
this device for the SRT stream.
3. Click the Start Stream button to start the SRT stream.
Text Overlay Video
The NVS-35 video streaming server not only allows you to stream and record your
program, it also features a CG tool that is capable of overlaying text on the video
currently being broadcast.
The CG settings page is shown below: