Datavideo HS-1600T, Инструкция по эксплуатации

Страница: 24 / 96

24
Note: Pressing the up or down arrow button on the control panel allows the user to either
increment or decrement the transition speed by 1. To change the value at an accelerated rate,
simply press and hold the left or right arrow button.
Wipe Effect
On the HS-1600T, there are three wipe effects available for the user to choose. The three wipe effects
are
HORIZONTAL , VERTICAL and CENTER . The default is Horizontal.
WIPE Border Size
The WIPE Border Size generally allows the user to select an appropriate border width. Setting the
WIPE Border Size to OFF turns the border off. Setting the border size to small selects a thin border;
middle will yield a medium size width; large is the maximum wipe border width.
WIPE Border Color
In this option, you will be allowed to select a color for your wipe border. The available colors are listed
as follows:

White

Yellow

Cyan

Green

Magenta

Red

Blue

Black
BKG Color
In this option, you will be allowed to assign a color to the BKG button. The available colors are listed
as follows:

White

Yellow

Cyan

Green

Magenta

Red

Blue

Black
3.2 PIP / Split
Picture-In-Picture (P-In-P) places a sub window on the PGM or Multiview screen. You can configure
various settings of the PIP window in the PIP/Split sub menu.
Note: When PIP and Lumakey features are enabled at the same time, the lumakey source will be
the upper layer and the PIP source will be the lower layer. The layer order cannot be changed.
Main Sub-Menu Options or Values Default Value
PIP/Split PIP Source
Black
Input 1
Input 2
Input 3 Input 2