Datavideo HS-1600T-2C140TM, Инструкция по эксплуатации

Страница: 28 / 63

28
3.5.5 Tally Mode
Tally output port generally sends two tally signals to each channel. In Datavideo products, Red
indicates On-Air, and Green indicates next camera source.
The HS-1600T provides two tally modes :
Normal : If in normal mode, tally lights of all camera sources displayed on the PGM monitor will be
turned ON (Red). These sources include PGM, PIP and Key sources. While transition is in progress, the
next video will be seen on the PGM monitor, tally light of the PVW source camera will thus also be
turned ON (
Red ).
Audio Mixer : If Audio Mixer mode is selected, tally light of the PGM source camera selected on the
keyboard panel will be turned ON (Red). While transition is in progress, the tally light color will remain
unchanged. The tally light color will only change (red/green) after the transition of PGM and PVW
views is complete.
3.6 User Mems
In “ User Mems ”, the user is allowed to load previously saved settings and save the currently
configured settings.
Option Parameters Parameter Value or Range Default Value
User Mems Load Memory User 1-6
Load
Save Memory User 1-6
Save
3.6.1 Load Memory
Use the up/down arrow to select the desired memory location and load the saved setting by selecting
“
Load ”.
Tip: The user can also press one of the USER memory shortcut buttons (1-3) on the control panel as a
quick way of loading those previously saved User configurations. Use the SHIFT button to switch
between USER MEMORY 1-3 and USER MEMORY 4-6 .
3.6.2 Save Memory
Use the up/down arrow to select the desired memory location and save the current setting by
selecting “
Save ”.
3.7 Setup
In the “Setup” menu, the user can change the output resolution , reset the HS-1600T to its Factory
Default values, choose the preferred OSD menu language , upgrade firmware and view the current
firmware versions (Mainboard and Keyboard).
Option Parameters Parameter Value or Range Default Value
Setup PGM Out Res.
1080p/60
1080p/59.94
1080p/50