Datavideo HBT-30, Инструкция по эксплуатации

Страница: 20 / 32

20
20. Please use an RJ-45 RS-422 cable to connect from the RS-
422/RS-232 interface which is located on the rear panel of the HBT-
30 to the RS-232/RS-422 REMOTE 3 interface which is located on
the rear panel of the ShowCast 100.
4.2 If you use the DVIP Protocol for Remote Controlling (Take system
diagram as an example)
4.2.1 Required Equipment

HBT-30 x 1

DC IN 56V DC adapter included with HBT-30 x 1

PTC-280 x 3

HBT-15 x 3

ShowCast 100 x 1

HDMI cable (Max.10M) x 6

RJ-45 DVIP Cable x 3

CAT 6A Ethernet cable (Max. 100M) x 3 (The upper limit for
the power which is supplied by the HBT-30 for each channel
is 65W)

DC 12V male to male power cable x 3

Wi-Fi router x 1

RJ-45 Ethernet cable x 2