Datavideo BC-100, Инструкция по эксплуатации

Страница: 14 / 64

14
3.5 DIP Switch of the BC-100
The 4 position Dip Switch is used for controlling modes of the BC-100. Please refer to following
paragraphs for details of the DIP Switch control.
For the DIP Switch of the BC-100, the position 1 is reserved for future extension, the position 2 is
used for RS-232/RS-422 control mode switching, the position 3 is used for tally signal switching
and the position 4 is used for LANC control mode switching (Master/Slave).
BC-100 DIP Switch
Position Function Note
1
Reserved for future
extension
Please fix the DIP Switch at 0.
2 Control mode switching
(RS-232/RS-422)
3 Tally signal source For connecting the BC-100 to the Atomos/BMD
recorder, please slide this position to 0. If the BC-
100 is connected to a switcher, please slide this
position to 1.
4 LANC control mode
switching For connecting the BC-100 to the Atomos
recorder, please slide this position to 0.
BC-100 DIP Switch
1 2 3 4
0 Reserved for future
extension RS-232 Internal Tally LANC Master
1 RS-422 External Tally LANC Slave