INTRODUCTION
The BAC-03 is a bi-directional unbalanced to balanced and
balanced to unbalanced audio converter, with four independent
amplifiers providing stereo audio input and output.
Specifications
UNBAL to BAL Output
BAL to UNBAL Output
INPUT LEVEL
-10dBv nominal
0dBm to +8dBm
nominal
INPUT IMPED
50K ohm
50K ohm
GAIN
+4 to +20dB
-20dB to +18dB
OUTPUT
LEVEL
0 to +8dBm nom,
+22dBm max
-10dBv nom, +20dBv
max
OUTPUT
LOAD
600 ohms or higher,
balanced
600 ohms or higher,
unbalanced
FREQ
RESPONSE
DC to 25kHz, +/-0.5dB
DC to 25kHz, +/-0.5dB
NOISE LEVEL
80dB below nom
output level
80dB below nom
output level
DISTORTION
<0.01% at any
frequency
<0.01% at any
frequency
POWER INPUT
DC 12V, 200mA
DIMENSIONS
140(W) x 112(D)
x40(H) mm
Notes
1)
All XLR connectors should be wired as:
Pin 1= GND
Pin 2=HI
Pin 3=LO
2)
If the BAC-03 is used to feed an unbalanced load, connect to
pins 1(GND) and 2(HI) only! DO NOT short pin 3 to ground.
