Datavideo 4K ShowCast STUDIO, Инструкция по эксплуатации

Страница: 28 / 98

28
progressive video is chosen and 2 seconds if the interlaced video is chosen. When the Scroll Bar is
tapped, the transition will take place at the current Transition Speed defined by the user.
Wipe Effect
On the ShowCast-100, there are three wipe effects available for the user to choose. The three wipe
directions are left to right, top to bottom and center in. The default is left to right.
WIPE Border Size
The WIPE Border Size generally allows the user to select an appropriate border width. Setting the WIPE
Border Size to OFF turns the border off. Setting the border size to small selects a thin border; middle
will yield a medium size width; large is the maximum wipe border width.
WIPE Border Color
Use this option to select a color for your wipe border. The available colors are listed as follows:

White

Yellow

Cyan

Green

Magenta

Red

Blue

Black
BKG Color
Use this option to assign a color to the BKG button. The available colors are listed as follows:

White

Yellow

Cyan

Green

Magenta

Red

Blue

Black
WIPE Rev.
Use this option to set the WIPE direction. You can select the normal direction or rev to reverse it. The
default is normal direction.
3.2 PIP / Split
Activating PIP mode (Picture-In-Picture) places a sub window on the PGM or PVW screen. The Split
mode, once enabled, splits the PROGRAM output display into two windows with
the split source shown
on the left and the PIP source shown on the right .
The PIP/Split sub menu allows you to configure various settings of the PIP and Split windows.
Note: When PIP and Lumakey features are enabled at the same time, the lumakey source will be on
top of the PIP source. The layer order cannot be changed.