Datas Technology D-100 Series, Руководство по установке

Страница: 4 / 42

FCC Requirements
Part 68: The Datas D-100 complies with 47 CFR, Part 68 of the rules. On the back of the
unit there is a label that contains, among other information, the Certification Number and the
Ringer Equivalence Number (REN) for this equipment. You must, upon request, provide this infor-
mation to your local telephone company.
The REN is useful to determine the quantity of devices that you may connect to your telephone line
and still have all of those devices ring when your telephone number is called. In most, but not all
areas, the sum of the REN’s of all devices connected to one line should not exceed five (5.0). To be
certain of the number of devices that you may connect to your line, you may want to contact your
local telephone company to determine the maximum REN for your calling area.
The applicable certification jack USOC for this equipment is: RJ11C. The facility interface code
(FIC) for this equipment is: 02LS2.
A compliant telephone cord and modular plug are provided with equipment. This equipment is
designated to be connected to the telephone network or premises wiring using a compatible
modular jack which is Part 68 compliant. See Installation Instructions for details.
This equipment may not be used on coin service units provided by the telephone company.
Connection to party lines is subject to state tariffs. Contact the state public utility commission, pub-
lic service commission or corporation commission for information.
Should the D-100 cause harm to the telephone network, the telephone company may discontin-
ue your service temporarily. If possible, they will notify you in advance. But if advance notice isn’t
practical, the telephone company may temporarily discontinue service without notice and you will
be notified as soon as possible. You will be informed of your right to file a complaint with the
FCC. The telephone company may make changes in its facilities, equipment, operations, or proce-
dures where such action is reasonably required in the operation of its business and is not inconsis-
tent with the rules and regulations of the FCC that could affect the proper functioning of your
equipment. If they do, you will be notified in advance to give you an opportunity to maintain unin-
terrupted telephone service.
If you experience trouble with the Datas D-100, or you need information on obtaining
service or repairs, please contact:
Datas Technology Ltd.
Unit 2, 20/F., Kingsfield Centre
18-20 Shell Street, North Point, Hong Kong
Tel: (852) 2343-2290 Fax: (852) 2512-2117
If the equipment is causing harm to the telephone network, the telephone company may ask that
you disconnect this equipment from the network until the problem has been corrected or until you
are sure that the equipment is not malfunctioning.
Part 15: This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable pro-
tection against harmful interference when the equipment is operated in a commercial environment.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which
case the user will be required to correct the interference at his own expense.
Installation Manual
iv