Dataradio Paragon, Техническое руководство

Страница: 26 / 72

120 20170-204a Paragon
PD
Technical Manual 18
4. WinRIS program
1
The Windows Radio Installation Software
(WinRIS) program is used to:
•
Check and troubleshoot Paragon
PD
.
•
Save an existing configuration.
•
Upload files for field configuring of units
(Requires intervention with technical sup-
port).
To run the program, you will need:
-
A PC or portable computer running a 32-bit
MS-Windows application:
(Each program copyright © Microsoft Corpora-
tion. All rights reserved.)
Win ME
Win2000
Win NT
Win 9x
(For Win 95, if COMCTL32.DLL has been
updated to the most recent version and
copied to the \windows\system\ directory).
Note:
WinRIS does not operate under:
- Win CE (embedded in PocketPC)
- 16-bit Windows 3.x
- A hard disk.
- An available COM port.
A serial mouse, with its own driver installed is
strongly recommend however most actions can
also be done using keyboard command
4.1 Operation
This support program can be run in MS-
Windows mode.
DO NOT have more than one copy of this pro-
gram loaded at any given time in separate win-
dows. Doing so creates COM port sharing con-
flicts and failure to run the program alone re-
sults in unexpected transmissions.
1
For descriptions of features revised or added to
WinRIS versions later than 3.xx, please refer to the
program’s context-sensitive help or type FI
Only left mouse button operation is supported.
Any command or selection shown in gray is ei-
ther unavailable or is awaiting another action
before activating.
Help in the program is available at all points by
pressing the F1 key. If a subject is highlighted,
the help displayed will be context sensitive.
4.2 To connect and start
WinRIS
All families of MobilPacs, Paragons, Gem-
ini
PD
’s and Paragon
PD
’s share a common Win-
RIS program available on diskette, Dataradio
p/n 980 03392-00
n .
Refer to the WinRIS Readme.txt
file for details on how to set the
MS-Windows environment, and
how to connect, install and run
this program.
In summary, before starting the WinRIS when
running MS-Windows, click on “Start”, then on
"Run". Type the relevant path and variables on
the command line (or select by browsing) lead-
ing to:
WinRIS.EXE COM[x], [speed],8,n,1
(where x is the PC COM port to be used) Of
course, the executable command may be used
alone without any variable added.
Click on “OK”.
It is also possible to create a PC desktop short-
cut icon for WinRIS:
In MS-Windows 98
•
Start by right clicking anywhere on the
desktop,
•
Select New,
•
Select Shortcut and type the path as detailed
above directly on the command line (with or
without variables).
•
Click Next,
•
Type in an applicable name for the shortcut
icon,
•
Click Next
•
Select an icon (your choice) and
•
Click on Finish.