manualshive.com logo in svg

Dataradio Integra-TR, Техническое руководство, Страница: 43 / 68

Поделиться
Скачать
Dataradio Integra-TR Скачать руководство пользователя страница 43

2-23

Part No. 001-4008-101/102

RevP

RevP displays the approximate measure of reverse (reflected) power of the unit transmitting the diagnostics. 
This is represented as “Good” if the reverse power is within acceptable limits and is represented as “Bad” if 
the reverse power is too high.

RSSI

RSSI displays the Remote RSSI (in dBm) of the unit last transmitting the diagnostics. This is the RSSI 
found in the Online Diagnostics of the last transmission received by the unit.

Rx Quality

Rx Quality displays the receive quality (in %) of the remote unit. This is the number of correctly decoded 
transmissions received (in the last 15) divided by the number of total transmissions detected.

Time

Time is the time stamp when the diagnostics were received.

Filter

Filter allows the user to filter Short IDs. The following options are available:

z

Off (All IDs): no IDs are filtered out

z

ID List: only the IDs in the Filter ID List are shown

z

Selected ID: only the selected ID in the Filter ID List is shown

Display

Display allows the user to format on screen data. The following options are available:

z

Scroll (by time): displays the diagnostics as they are received

z

Slotted (by ID): sorts the diagnostics by Short ID. Using this option, each Short ID will have one row of diagnostics, 
showing the most recent

Filter ID List

Filter ID List is a listing of Remote IDs setup in the Diagnostic IDs and Alarms Screen. This list is used for 
selecting a filter.

Progress

The Progress panel shows the sorting progress of the diagnostics if a filter was changed.

Pause

The Pause button allows the user to pause the reception of the diagnostics for scrolling through the grid.

Clear

The Clear button allows the user to clear the display and current Online Diagnostics.

Содержание Integra-TR





































































Отзывы:

Нет отзывов