
120 20131-301
Gemini G3 - User Manual
45
The following setup example would allow the “Sender” unit to communicate with different multicast
groups. The settings for mobile and base are shown in Figure 40 below. Also represented in Figure
41, it would enable the Sender unit to reach all entities of the various groups.
Figure 40 - Multicast Window Details (On the Mobile on the left and on the base on the right)
Multicast (Enabled/Disabled)
Enables or disables the registration of the multicast groups by the Base
Must be enabled on both Base and Mobiles
Base address
Indicates the “All Base” multicast group
(Not currently supported)
Outbound unit address
Indicates the “All Mobile” multicast group
(Base side; DMP-IP only)
Multicast Address List
Indicates the various “Mobile Host” groups
Must be set on both Base and Mobiles
Figure 41 - Typical E-DBA Multicast Groups (with addresses)
Sender
Network
“All Base”
group
(224.168.202.1)
“All Mobile”
group
(224.168.201.1)
Base (P3)
Base (P3)
RF Airlinks
Mobile Host
Mobile Host
Mobile Host
Mobile Host
Mobile Host
“Mobile Host”
group 1
(224.168.200.1)
“Mobile Host”
group 2
(224.168.200.2)
Mobile (G3)
Mobile (G3)
Mobile (G3) Mobile (G3) Mobile (G3)