120 20131-301
Gemini G3 - User Manual
17
4.2 LAN Setup
Check that DC power is applied to the GeminiG3 radiomodem. On a PC running MS-Windows with
an existing LAN connection, connect to the RJ-45 input of the GeminiG3 unit.
1.
Click Start
Î
Settings
Î
Control Panel
Î
Network and Dial-up Connection
2.
Click on the relevant Local Area Connection
3.
On the Local Area Connection Status screen, click Properties
4.
On the Local Area Connection Properties screen, scroll the List Box until “Internet Protocol
(TCP/IP)” is highlighted, click Properties
5.
On the Internet Protocol (TCP/IP) Properties screen, follow either method below:
A)
Select “Obtain an IP address automatically”
B)
Select “Use the following IP address”
Î
Enter 192.168.201.2 in the IP address field
Î
255.255.255.0 in the Subnet mask
Î
Leave the Default gateway blank.
6.
Click the OK button
Notes: Certain OSes require rebooting to complete the connection process.
Steps above specifically apply to MS-Windows 2000. Modify as necessary for the OS you
are running.
4.3 Default IP Settings
4.3.1 Ethernet Interface
•
MAC:
00:0A:99:XX:YY:ZZ
•
IP ADDR:
192.168.201.1
•
NETMASK: 255.255.255.0
•
Default Gateway:
automatically set to current Base RF IP address
•
DHCP Server Enabled
•
NAT
Enabled
4.3.2 RF Interface
•
MAC:
00:XX:YY:ZZ
•
IP ADDR:
10.XX.YY.ZZ
•
NETMASK:
255.0.0.0
•
TCP Proxy
Enabled
Notes:
XX:YY:ZZ refer to lower three bytes of Ethernet MAC address