manualshive.com logo in svg

Dataradio G3, Руководство пользователя, Страница: 42 / 88

Поделиться
Скачать
Dataradio G3 Скачать руководство пользователя страница 42

 

120 20131-301

 

 

Gemini G3 - User Manual

 

30

Lease Start Address 

Pool of addresses allocated for DHCP purpose. If a unit is configured as DHCP 
Server, this field represents the start IP address pool managed by the DHCP 
Server. Normally, GeminiG3 radiomodem automatically calculates the Lease Start 
Address (equal to Ethernet IP Address plus one). 

Lease Duration 

The period over which the IP Address allocated to a DHCP client is referred to as 
a “lease”. Lease Duration is the amount entered in minutes. 

A value of “0” indicates an infinite lease. 

Maximum number of leases 

Maximum number of DHCP client(s) a unit can serve. 

IPSD 

I/P Services Delivery – Disabled (Default), Enabled. 

Allows or disallows the generation of locally provided IP Services such as online 
diagnostics, alarms, etc… 

NAT 

Network Address Translation - Disabled, Enabled (Default) 

NAT technology is a method by which IP addresses are mapped from one ad-
dress space to another. In GeminiG3, it is normally used on the WAN side of an IP 
network to hide local IP addresses from an external IP network (i.e. Internet). 

See section 4.6.3.5.1 on the next page for a more detailed description 

SNMP 

Simple Network Management Protocol- Disabled, Enabled (Default) 

SNMP provides means to monitor, collect and analyze diagnostic information. 
After reset, the GeminiG3 sends a WARMSTART trap to all of the local (those 
routed through the Ethernet interface) IP addresses. 

Trap IP List 

To add an address to the Trap IP List: 

Select 

Add

 and type the new IP address to be added to the read-only Trap IP List. 

The window will expand downward to show all addresses in the list.  

To delete an address from the Trap IP List: 

Select 

Delete

 and type the IP address to be deleted from the read-only Trap IP 

List. 

Stop Current Trap Report 

A trap report will be re-sent repeatedly until the 

Stop current trap report

 check 

box is selected.  

The main purpose of “Stop current trap report” option is to protect the network 
from being overloaded by excessive Trap reporting.  

MIBS 

Management Information Base -used to assemble and interpret SNMP messages. 

The Dataradio Paragon3  MIB is bundled with each unit's firmware. Click "Down-
load mibs.zip" and a pop-up dialog box will appear in your browser asking you to 
open or save the file to your PC. Save the zip file to a desired location. Unzip the 
contents of mibs.zip file to a location where your SNMP manager can find it

. 

Note: SNMP must be enabled in order for the host PC SNMP manager to work

. 

 

Содержание G3

























































































Отзывы:

Нет отзывов