120 20131-301
Gemini G3 - User Manual
20
4.6 Web Interface
The GeminiG3 user interface (Figure 11) is used to configure and view your network settings.
To navigate, use the top-level menus on the left, some of which expand to offer submenus, and dis-
play the first submenu in the right-hand frame. Click the current submenu entry to refresh the right-
hand frame. The tables starting at section 4.7.1.1 below list action of each function. The interface
main screen lists available selections for the selected menu or presents instructions.
Important note:
Record all original GeminiG3 radiomodem factory settings for possible future use.
4.6.1 Apply, Cancel, Save Config, and Reset Unit Buttons & Help Icon
Several submenus have “Apply” and “Cancel”
buttons.
The navigation area has “Save Config”, “Reset Unit” buttons and a Help
icon.
When making an entry into a dialog box, click on Apply when satisfied to
temporarily apply the value(s) entered to the relevant parameter(s). If not satisfied, click on Cancel
button to restore to the value(s) present before a change was made.
Note:
Cancel command only affects the dialog boxes or option buttons in the opened window.
If needed, go to other submenu(s) and make more entries. Click Apply before leaving each window.
When finished, click the Save Config button to make all changed entries permanent.
Notes:
“Apply” writes to RAM, thus failure to use the “Apply” command button before leaving a web
page will result in the loss of temporarily entered selections, addresses, and values.
“Save Config” writes in flash, thus failure to use the “Save Config” command button will result
in the loss of temporarily entered parameters. A “Reset” is required to make flash changes take
effect.
Click on Save Config button:
•
If there are changes to be saved, saving occurs automatically.
•
If there are no changes to be saved, a window prompts user to confirm saving.
Click on “Reset Unit” button:
•
If there are changes to be saved, a window prompts user to confirm resetting.
•
If there are no changes to be saved, resetting occurs automatically.
A “Station Reset” 20-second timer counts down while the status reports: “Working…”
When done, the status reports: “Ready”.
At any time, click the Help Icon in the navigation pane to open a help text relating to the window be-
ing displayed.