DI-4730 Hardware Manual
Controls, Indicators, and Connections
19
W
IN
D
AQ
Remote Events (D0 Event)
To use a switch closure or TTL signal to record W
IN
D
AQ
Event Markers, connect signal leads to the appropriate
Remote Control Event terminals on the DI-4730 as shown below.
Once the switch closure or TTL signal is connected, activate Remote Events through W
IN
D
AQ
Acquisition Software.
Events may be automatically placed on the rising or falling edge of the trigger signal. Use the menu command
Options
>
Remote
to set W
IN
D
AQ
to place event markers on low-to-high transitions of the Event input.
Use the menu command
Options
>
Remote Events -
to set W
IN
D
AQ
to place event markers on high-to-low transi-
tions of the Event input.
Event markers may also be placed in your data file manually by pressing the push button on the instrument. You must
enable Remote Events in W
IN
D
AQ
to use the button (use the menu command
Options
>
Remote
or
Options
>
Remote Events -
).
Ethernet
USB
USB Drive
Status
Button
Power
D4
D5
D6
D3
Count
D2
Rate
D1
Record
D0
Event
Digital Inputs (0 - 25V Max)
Signal -
Excitation
Ethernet
USB
USB Drive
Status
Button
Power
D4
D5
D6
D3
Count
D2
Rate
D1
Record
D0
Event
Digital Inputs (0 - 25V Max)
Excitation
