DI-2008 Hardware Manual
Controls, Indicators, and Connections
13
3. Select
Voltage
in the Input Type selection box.
4. Click on the desired gain setting for that channel.
5. Click the
Next
button to access channel settings for the next channel or click the
OK
button to close the dialog
box.
Thermocouple Measurements
Each analog input channel on the DI-2008 may be programmed for one of 8 possible thermocouple types (B, E, J, K,
N, R, S, or T). Change the thermocouple type for each channel individually:
1. Select the channel (click on the channel box in the left hand side of the waveform screen).
2. Open the Channel Settings dialog box. Select
Edit
>
Channel Settings
in the menu or press F10.
3. Select
Thermocouple
in the Input Type selection box.
4. Select the desired thermocouple type for that channel.
5. Click the
Next
button to access channel settings for the next channel or click the
OK
button to close the dialog
box.
Temperature scale may be changed to Celcius by un-checking the
Fahrenheit
check box. This changes the scale for
all
thermocouple temperature measurements.
