Cabling
23
Chapter 5 - Cabling
This Chapter will cover:
•
Connecting keyboard and mouse
•
Connecting to a network
•
Connecting input sources
•
Connecting a control screen (optional)
•
Connecting monitors
•
Connecting power cables
5.1 Connecting the Keyboard and Mouse
The keyboard and mouse supplied with your system both have a USB interface. Identify vacant USB ports on the chassis and
plug them in.
The location of the USB ports are identified in the previous chapter.
5.2 Connecting to a Network (Optional)
The optional WallControl 10 and Wall Control-red software enables the user to operate and manage the video wall display
remotely, via a network. The VSNMicro 600 has two Ethernet ports, plug your network cable (not supplied) into any port and
connect the VSNMicro 600 to the LAN, as shown below:
5.2.1 Network Security
It should be noted that network ports have a potential vulnerability. If your system is working in a secure environment you
probably don’t need to worry about unauthorised access to the LAN port. If your system is on a network that is generally
accessible, you will probably want to restrict access to the ports.
